Home > OVERSEAS DIVISION > Vietnam-based affiliate: RK Engineering Co., Ltd.: Corporate profile
Company name | RK Engineering Co., Ltd. |
---|---|
President | Saburo Kobayashi (President of Nippon Kyohan Kogyo Co., Ltd.) |
Management | General Director: Yuzuru Tsuchiya (Managing Director and Overseas Division Manager of Nippon Kyohan Kogyo Co., Ltd.) E-Mail:y-tsuchiya@nkweb.co.jp |
Address | <Office/Factory> Land Plot CN3.2K, Dinh Vu Industrial Zone, Dong Hai 2 Ward, Hai An Dist., Hai Phong, Vietnam (Dinh Vu Industrial Zone located in Hai Phong City, 100 km from Hanoi) Tel: +84-225-326-0715 to 8 Fax: +84-225-326-0719 E-Mail:info@rk-eng-vn.com |
Date of establishment | April 14, 2011 |
Start of operation | April 2012 |
Capital | US$600,000 |
Investment ratio | 100% by Nippon Kyohan Kogyo Co., Ltd. |
Business | Manufacture and sales of pressure vessels, head plates, industrial furnaces, refractories, burners, etc. |
Premises | Approx. 15,000 ㎡ |
Factory area | Approx. 5,300 ㎡ |
Number of employees | 85 |
Licenses and certificates | ASME Section I Power Boiler (S) No.43958 ASME Section VIII Division I Pressure Vessel (U) No.43959 |
Equipment | Description | Quantity |
---|---|---|
Car bottom heat treatment furnace* | Effective dimensions (4,000 mm wide x 4,000 mm high x 7,000 mm long) Max. temperature: 1,050°C, Max. weight: 30 t |
1 |
Hydraulic pressing machine | 1,000 t, 6,000 mm in width x 2,500 mm in daylight | 1 |
Hydraulic pressing machine (with manipulator)* | 300 t | 1 |
Spinning machine* | 22 t x 800 to 4,000 mm in diameter | 1 |
Special spinning machine | 14 t x 3,000 mm in diameter x 3,000 mm in max. height | 1 |
Bending roll | 25 t x 2,550 mm in width | 1 |
Bending roll | 6 t x 2,000 mm in width (150 mm in min. diameter) | 1 |
Stationary welding manipulator | Boom travel: 4,000 mm Up/down: 4,000 mm |
1 |
CNC gas/plasma cutting machine | Cutting width: 2,500 mm x length: 6,000 mm Max. cutting thickness (stainless steel: 60 mm, carbon steel: 120 mm) |
1 |
Lathe | Max. diameter: 1,600 mm, Max. length: 3,000 mm | 2 |
Band saw machine | Max. cutting thickness: 400 mm | 1 |
Milling machine | Table length: 800 mm | 2 |
Radial drilling machine | 1,210 mm L x 640 mm H x 32 mm in max. diameter | 2 |
Slotter | Max. diameter: 100 mm | 1 |
Welding positioner | 500 kg, 150 kg | 3 |
Turning rolls | 10 t | 6 |
Turning rolls | 5 t | 3 |
Gas cutting machine | 6 | |
Plasma cutting machine | Max. 60 mm | 1 |
Submerged arc welding machine | 1,000 A | 1 |
Automatic TIG welding machine | 400 A | 2 |
Tube end sealing welding machine | 300 A | 1 |
MAG welding machine | 350 A | 25 |
TIG welding machine | 300 A | 9 |
TIG welding machine (small-sized) | 200 A | 2 |
Arc welding machine | 400 A | 3 |
Arc welding machine (small-sized) | 200 A | 5 |
DC arc welding machine | 630 A | 2 |
Grinder | 27 | |
Beveling machine for head plate | 1 | |
Polishing machine (automatic) | 1 | |
Polishing machine (manual) | 4 | |
Hydraulic pressing machine (for straightening) | 100 t | 1 |
Compressor | 15 Hp | 2 |
Pressure pump | 4 | |
PMI (positive material identification) equipment | 1 | |
Open yard gantry crane | 20t/5t | 1 |
Overhead travelling crane | 20 t | 2 |
Overhead travelling crane | 10/5 t | 1 |
Overhead travelling crane | 10 t | 2 |
Overhead travelling crane | 5 t | 5 |
Jib crane | 0.5 t | 4 |
Forklift | 5 t | 1 |
Welding rod dryer | 100 kg | 1 |
Portable welding rod dryer | 4 | |
Helium leak detector | 1 | |
Vacuum pump | 2 |